Thanks for visiting Jewelry Boxes For Women. Please remember to bookmark this page Red Hearts Bead. If you found what your looking for, then don"t forget to click an appreciation button above for this post.
Red Hearts Bead
Powder glass beads
Types of beads
Krobo beads
Krobo bead (fused glass fragments)
Krobo powder glass beads are made in vertical molds fashioned out of a special, locally dug clay. Most molds have a number of depressions, designed to hold one bead each, and each of these depressions, in turn, has a small central depression to hold the stem of a cassava leaf. The mold is filled with finely ground glass that can be built up in layers in order to form sequences and patterns of different shapes and colours. The technique could be described as being somewhat similar to creating a sand "painting" or to filling a bottle with different-coloured sands and is called the "vertical-mold dry powder glass technique". When cassava leaf stems are used, these will burn away during firing and leave the bead perforation. Certain powder glass bead variants, however, receive their perforations after firing, by piercing the still hot and pliable glass with a hand-made, pointed metal tool. Firing takes place in clay kilns until the glass fuses.
There are three distinct styles of modern Krobo powder glass beads:
Krobo "Writing" beads
Fused glass fragment beads which are being made by fusing together fairly large bottle glass or glass bead fragments. These beads are translucent or semi-translucent and receive their perforations, as well as their final shapes, after firing.
Beads composed of two halves (usually bicones, occasionally spheres) that are being created from pulverized glass. The two halves are being joined together in a second, short firing process.
The "Mue ne Angma" or "Writing Beads", conventional powder glass beads made from finely ground glass, with glass slurry decorations that are being "written" on and fused in a second firing.
Akoso beads
Akoso beads
Older Ghanaian dry core powder glass beads, dating from the 1950s, are the Akoso beads, which were also manufactured by the Krobo. The most common colour of Akoso beads is yellow. There are also green, and rarely blue or black specimens. The glass surface is often worn away at the ends and around the beads' equator, exposing a grey core. The most prevalent decorations, preformed from strips of hot glass, were applied in patterns of cross-crossed loops, longitudinal stripes and circles. Glass from crushed Venetian beads was used for making the glass powder, and the decorative patterns were made of glass derived from Venetian beads, or from small whole Venetian beads such as so-called green heart and white-heart beads.
Meteyi beads
Ashanti, Meteyi beads
Meteyi beads were made by the Ashanti people of Ghana. Longitudinal seams that can often be observed on these beads give evidence that they were made in horizontal molds. Meteyi beads are often ellipsoid in cross section and they have a rough surface on the side which touched the bottom of the mold during firing. They can be opaque yellow, and more rarely, green, blue or white, with stripe decorations in combinations of blue, yellow, white or red. Manufacture ceased during the 1940s.
Ateyun beads
Yoruba, Ateyun beads
Another West African people known to produce powder glass beads are the Yoruba from Nigeria. Beads from their production differ technically from typical Ghanaian powder glass beads in that they are not made in molds and in the wet-core technique. Finely crushed glass is moistened with water and shaped by hand. The perforations are made before the beads are fired, using a pointed tool. So-called Ateyun beads were made in different shapes but always in red, to imitate real Mediterranean coral. Genuine coral was rare, but very much sought after and highly valued by the Yoruba people. Yoruba bead makers made their own imitations at more affordable prices.
Keta awuazi beads
Yoruba, Keta awuazi beads
Apart from red beads imitating coral, blue beads were also highly valued. Keta awuazi beads, originating from Nigeria or possibly Togo, were made in horizontal molds and mold marks are often evident along their sides. Keta awuazi beads are cylindrical in shape. Manufacture ceased during the 1940s. Krobo bead makers produced similar blue powder glass beads, using glass derived from cold cream jars to achieve the blue colouration.
Kiffa beads
Mauritanian Kiffa beads
Main article: Kiffa beads
Mauritanian Kiffa beads are also manufactured in the wet core technique. Glass which is finely crushed to a powder is mixed with a binder such as saliva or gum arabic diluted in water. Decorations are made from the glass slurry i.e. crushed glass mixed with a binder, and applied with a pointed tool, usually a steel needle. The beads are formed by hand and not placed in molds. The firing takes place in small containers, often sardine cans, in open fires.
References
^ Barbot, J (1746). "A Voyage to New Calabar". Collection of Voyages and Travels, Linot and Osborn (6 vols.): 455467.
Barbot, J (1746). "A Voyage to New Calabar". Collection of Voyages and Travels, Linot and Osborn (6 vols.): 455467.
External links
Krobo beadmaker - Nomoda Ebenizer Djaba is a contemporary beadmaker from the Odumasi/Krobo area in Ghana.
African Krobo Beads - Source for history on African beadwork and Krobo beads.
Categories: Glass art | BeadworkHidden categories: Articles to be expanded from January 2007 | All articles to be expanded
About the Author
I am a professional writer from Chinese Manufacturers, which contains a great deal of information about $keyword_li, welcome to visit!

If you are looking for a different item here are a list of related products on Jewelry Boxes For Women, please check out the following:




























































































